Look TRAIL ROC - Installing the Pedals on the Crank Arms; Locating Left and Right Pedals; Tightening the Pedal on the Crank Arm

14
EN
B / TIGHTENING THE PEDAL ON THE CRANK ARM
25 Nm
25 Nm
B/ SERRAGE DE LA PEDALE SUR MANIVELLE
B/ SERRAGE DE LA PEDALE SUR MANIVELLE
INSTALLING THE PEDALS ON THE CRANK ARMS
PRODUCT CONCERNED : GEO CITY GRIP VISION / GEO CITY GRIP / TRAIL GRIP
Before installing your pedals, ensure the screw threads on the crank arms are BSA standard (9/16x20).
Clean and grease the crank arm threads before inserting the pedal. Locate the left pedal, marked with a
ring around the axle (See diagram A). The pedal screws in counterclockwise. Using an 8mm Allen wrench,
tighten to a torque of 25Nm (See diagram B).
A / LOCATING THE LEFT AND RIGHT HAND PEDALS
B
A
DÉTAIL
B
ECHELLE
2 : 1
DÉTAIL
A
ECHELLE
2 : 1
B
A
DÉTAIL
B
ECHELLE
2 : 1
DÉTAIL
A
ECHELLE
2 : 1
B
A
DÉTAIL
B
ECHELLE
2 : 1
DÉTAIL
A
ECHELLE
2 : 1
B
A
DÉTAIL
B
ECHELLE
2 : 1
DÉTAIL
A
ECHELLE
2 : 1
LEFT PEDAL
RIGHT PEDAL