Loop-O9500 SDH/SONET IMAP
Firmware Upgrade and Warranty Renewal.
The Customer whose warranty has lapsed or desire to have a firmware
upgrade can purchase this option.
This will upgrade the firmware to the most current version and provide
an additional 12 months of support.
For available card types, please
refer to the table below for detail
information.
For Firmware Upgrade:
Where card is used to select card type:
16 E1 (120 ohm) or 16 T1 software programmable plug-in card
32 E1 (120 ohm) or 32 T1 software programmable plug-in card
63 E1 (120 ohm) or 63 T1 software programmable plug-in card
16 E1(75 ohm) plug-in card
32 E1(75 ohm) plug-in card
63 E1(75 ohm) plug-in card
STM-1/4 (OC-3/12) software configurable p lug-in card without SFP
(mini-GBIC) optical modules
1 GbE or 8FE software programmable plug-in card without L2 switch
1GbE and 8FE plug-in card with L2 switch
3 T3 or 3 E3 software programmable interface plug-in card
7-port Fiber Optical Interface with 7 SFP housings (SFP not included)
1-port Fiber Optical Interface
Example:
Loop-O9500-R-CHA-G, Loop-O9500-R-CBA-G, Loop-O9500-R-FANA-G, Loop-O9500-R-CC4-G,
Loop-O9500-R-63TE-G, Loop-O9500-4E1-RJ, Loop-O9500-R-4GH, Loop-O9500-R-SD48:
For model O9500 6U height Rack chassis with one CPU card, one connect board, and one Fan board, one 63E1 software
programmable interface plug-in card, one 4-channel E1 interface with RJ48C connectors, one 4-channel G.SHDSL
plug-in card (1-pair), and a single –48 Vdc power module.
To Next Page
Loading...