Loop Telecom Loop-O9500R - Page 7

Loop-O9500 SDH/SONET IMAP
SDH/SONET-MSTP
7
Loop-O9500-R-RTB-G
8-LAN port/64 WAN ports router/bridge
plug-in card
· This card can also be used in the
· Loop-AM3440-A/B/C.
Loop-O9500-R-CONF-G
Conference plug-in card with two RS232 data
ports, two FXS ports and two E&M ports
· This card can also be used in the
Loop-AM3440-A/B/C.
Loop-O9500-R-TDMoE-PPM-G
TDMoE card with 2 GbE combo interfaces
and 2 Ethernet interfaces
(10/100/1000BaseT) plug-in module.
Support G.823 Traffic
· The SFP module is not included in
the TDMoE card.
· Please order separately for SFP
optical modules from SFP optical
brochure
· This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-8UDTEA-opm-G
8-port universal data interface card that
supports RS232/RS422/RS485 DCE
interface which is software configurable
Available option mode: Terminal Server
and/or Omnibus
· For opm option, please refer to
the table below for detail
information.
· This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-8EM-x-G
8-channel 2W/4W E&M plug-in card with 8
RJ45
· “8EM” card with H/W ver. F (and
later versions), F/W V4.01.01 (and
later versions) can also be used in
the Loop-AM3440-A /B/C.
· For x option, please refer to the
table below.
Loop-O9500-R-12MAG-1G-x-G
12-channel Magneto plug-in module w/ L1.
GND
· 12MAG-1G2 includes all function
of MAG cards.
· For x option, please refer to the
table below for detail information.
· This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-12MAG-12-x-G
12-channel Magneto plug-in module w/ L1,L2
Loop-O9500-R-12MAG-1G2-x-G
12-channel Magneto plug-in module w/ L1,L2
and L1. GND
Loop-O9500-R-12MAG-A-1G-x-G
12-channel Magneto ring-one-time plug-in
module w/ L1. GND
· 12MAG-A-1G2 includes all
function of 12MAG-A cards.
· This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-12MAG-A-12-x-G
12-channel Magneto ring-one-time plug-in
module w/ L1, L2
Loop-O9500-R-12MAG-A-1G2-x-G
12-channel Magneto ring-one-time plug-in
module w/ L1, L2, and L1. GND
Loop-O9500-R-12FXS- sn-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR, without
Ground Start and Metering Pulse. Used with
12 RJ11.
· 12FXS-GMP includes all FXS
Card functions.
· “12FXS-x” cards with H/W ver. L
and F/W V.3.01.01 or newer
versions.
· It can also be used in the
Loop-AM3440-A /B/C
· For sn option, please refer to the
table below for detail information.
· pt= power type
· For pt option, please refer to the
table below for detail information
Loop-O9500-R-12FXS-P-sn-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR, without
Ground Start and Metering Pulse PLAR bit
programmable function. Used with 12 RJ11.
Loop-O9500-R-12FXS-M-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR,
[Metering Pulse]. Used with 12 RJ11.
Loop-O9500-R-12FXS-MPP-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR and
PLAR bit programmable function, [Metering
Pulse]. Used with 12 RJ11.
Loop-O9500-R-12FXS-GS-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR, [Ground
Start] . Used with 12 RJ11.
Loop-O9500-R-12FXS-GM-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR, [Ground
Start, and Metering Pulse]. Used with 12
RJ11.
Loop-O9500-R-12FXS-GMP-pt-G
12-channel FXS plug-in card with 600/ 900
Impedance, Battery Reverse, PLAR and
PLAR bit programmable function, [Ground
Start, and Metering Pulse]. Used with 12
RJ11.