Loop Telecom Loop-O9500R - Page 6

Loop-O9500 SDH/SONET IMAP
SDH/SONET-MSTP
6
Loop-09500-R-9EoS4NSW-G
1 GbE or 8FE software programmable plug-in
card without L2 switch
· This card can also be used in the
Loop-O9400R.
Loop-O9500-R-9EoS4SW-G
1GbE and 8FE plug-in card with L2 switch
· This card can also be used in the
Loop-O9400R.
Loop-O9500-R-B16-G
STM-1/4 (OC-3/12) software configurable p
lug-in card without SFP (mini-GBIC) optical
modules
· This card can also be used in the
Loop-O9400R.
Loop-O9500-R-4GESW-G*
4 GbE card with 2 combo and 2 optical
(10/100/1000BaseT) interface plug-in module
with L2 switch
· Use with Loop-O9500-R-CC16-G
controller module only
· Use with Loop-O9500-R-CHAA-G
chassis‟ tributary slot 3 and 4 only.
*Future Option
Low Speed Tributary Modules (Single Slot)
Loop-O9500-R-4E1-cc-G
4-channel E1 plug-in card.
· This card can also be used in the
Loop-AM3440-A/B/C.
· For cc option, please refer to the
table below for detail information
Loop-O9500-R-4T1-G
4-channel T1 plug-in card
· This card can also be used in the
Loop-AM3440-A/B/C.
Loop- O9500-R-3E1-cc-G
3-channel E1 plug-in card with DS0 (64K bps)
SNCP protection
· For cc option, please refer to the
table below for detail information
This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-3T1-G
3-channel T1 Interface
· For software version 3.02.01 or
newer versions.
· This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-2GH-G
2-channel G.SHDSL plug-in card (2 pair)
· This card can also be used in the
Loop-AM3440-A/B/C.
Loop-O9500-R-4GH-G
4-channel G.SHDSL plug-in card (1 pair)
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop-O9500-R-8DC-G
8-channel dry contact plug-in card with
maximum voltage 100 Vdc or 250 Vac
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop- O9500-R-8DCB-G
8-channel dry contact type B plug-in card with
maximum voltage 220 Vdc or 250 Vac
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop-O9500-R-8CD-G
8-channel G.703 plug-in card at 64 Kbps data
rate
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop-O9500-R-1C37- LSFOM –G
1- channel C37.94 plug-in card
· For LSFOM option, please refer to
the table below for detail
information
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop-O9500-R-4C37- LSFOM –G
4- channel C37.94 plug-in card
Loop-O9500-R-8RS232-RJ- G
8-port RS232 plug-in card with X.50 subrate
multiplexing scheme and X.54 encoding, with
8 RJ48 connectors for 8 RS232 Async ports
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop-O9500-R-8RS232-DB-G
8-port RS232 plug-in card with X.50 subrate
multiplexing scheme and X.54 encoding, with
2RJ48 connectors and 2 DB44 connectors for
Async and Sync ports
· Two conversion cables are
included. (Each cable has one
DB44 connector to one DB9 and
two DB25 connectors).
· This card can also be used in the
Loop-AM3440-A /B/C.
Loop-O9500-R-8DBRA-RJ-G
8-channel data bridge plug-in card, with 8
RJ48 connectors for 8 data bridge Async
ports
· This card can also be used in the
Loop-AM3440-A/B/C
Loop-O9500-R-8DBRA-DB-G
8-channel data bridge plug-in card, with 2
RJ48 connectors and 2DB44 connectors for 8
data bridge Async ports
· Two conversion cables are
included (DB44 connector to two
DB25 and one DB9 connector;
(Loop-ACC-CAB-DB44M-100-
2DB25F-1DB09F-DB).