EasyManua.ls Logo

LORD V1 - How to Use; Unpacking the Appliance

LORD V1
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you cannot solve the problem, contact the authorized
service center line.
Always switch the vacuum cleaner off after use, and before
plugging it in again, make sure to hold the vacuum cleaner
firmly when using it.
If abnormal noise, smell, smoke or any other failure or
breakage was found during the operation, turn off the ON/OFF
button and unplug the appliance immediately. Then contact
with authorized service center for repair. Do not repair it by
yourself.
Use only original spare parts, filters and accessories
recommended by producer.
Unpacking the Appliance
1. Remove the appliance from the package.
2. Remove all packaging material such as films, fillers, foils and cardboard.
3. Check the delivery contents for completeness.
4. Should the package contents be incomplete or damages be found, do not take the appliance
into operation. Take it immediately back to the dealer.
WARNING:
Do not allow small children to play with the foil. There is a danger of suffocation!
ENGLISH
25