EasyManua.ls Logo

LORD V1 - Maintenance; Filter Maintenance

LORD V1
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fig. 16 Xtra-long CarflexCare nozzle is used for cleaning very hard to access places, such as
narrow, deep areas or crevices, corners, recesses, etc.
Fig. 17 SofaCare nozzle is used for cleaning upholstery surfaces as furniture, etc.
Fig. 18 Crevice nozzle is used for cleaning narrow areas, such as cracks, corners, recesses, etc.
Fig. 16 Fig. 17
Fig.18
1. Check all filters regularly.
The motor filter should be cleaned always when emptying dust tank.
The HEPA filter should be cleaned twice a year, and when there is obvious dirt on the
filter, it is time.
2. Fix the filters properly back after cleaning before start running the vacuum cleaner.
3. The filters can't be cleaned in the washing machine or by the blower.
4. It will reduce the suction power and damage the motor if you use the wet, dirty or damaged
filters.
5. Steps for maintenance:
MAINTENANCE
Fig. 19 Fig. 20
a) Fig. 19 Press the outlet lock to open the HEPA outlet cover.
b) Fig. 20 Press upper part of HEPA filter downwards and remove it.
ENGLISH
30