Lorelli MERCURY - Washing Instructions; Types of Approved Belts to Have in the Car; Adjusting the Tilt of the Seat

3. The plastic parts can be cleaned by using a wettish drapery. Please, do not use any solvate.
WASHING INSTRUCTIONS
1. The car seat can be cleaned using lukewarm water and soap. Do not use aggressive cleaners like
abrasives or thinner.
o
2. The cover should be washed by hand at a maximum temperature of 30 C. Do not put in the dryer, just
airing it.
Picture A
1. Base
3. Harness Adjustment Strap
4. Adjustment Device
5. Buckle Pads
6. Harness Buckle
Features
2. Recline Adjustment Handle
7. Harness Strap
8. Shoulder Pads
12. Headrest Handle
15. Release button
10. Headrest
14. Shell
18. Lap belt routing slot Group 0+
13. Cover
9. Baby Insert
11. Guide hook Group 0+;I
16. Guide hole
17. Harness connector
The child seat can be adjusted in 4 positions. (Picture 1;2;) Recline position “4” for Group 0+;I rearward
installation ; Position 1;2;3 for Group I forward facing installation; Position 1 for Group II;III . Pull the
positioning handle in the front part under the seat and then push or pull the seat forward or backward.
Release the handle to the desired position and press down until you hear a "click". Make sure the seat is
locked.
1. Adjusting the tilt of the seat
10