Need help?Do you have a question about the Lorenz Z2 Series and is the answer not in the manual?
Detailed explanation of detector settings like DELAY, GND, FILTER, AUTO, SENS, VOLUME, etc.
Explains conductivity readings (000-099) and their relation to metal types.
Describes FE/NON-FE icons indicating metal type, used with DD coils.
Details connecting search coils to the electronics unit via a coded jack.
Describes connections for headphones, charging, GPS module, and data transfer.
Explains the built-in loudspeaker's audio signals and their use for pinpointing.
Describes the 26cm coil for small objects, pinpointing, and use with frame coils.
Details the 26cm DD coil, enabling FE/NON-FE indications and better performance in mineralized soils.
Explains the 3-coil differential design for interference elimination and its unique signal response.
Highlights the 35cm coil for depth on medium objects and its sensitivity limitations for small items.
Describes the 35cm DD coil for stable operation on mineralized soils and FE/NON-FE identification.
Details the 44cm coil for extreme depth on large objects and its efficiency in covering ground.
Describes the user-friendly 1x1m frame coil, its low weight, simple assembly, and transportability.
Explains the 4m cable coil, identical to the 1x1m frame coil but without a frame.
Describes the smallest frame coil for extreme depth on small/medium objects, with indications for metal fragments and coins.
Details the lightweight 8m cable coil for various frame configurations, useful for large areas.
Explains the 1x1m coil for deep, hand-sized objects, offering high detection depths compared to VLF detectors.
Details the 2x2m coil covering large areas, useful for ignoring smaller objects, and its limitations for small items.
Explains the compensated 1x2m coil for areas with expected interferences, offering good detection depths.
Describes the large 12m cable coil for highest detection depths on large objects, enhanced by electronics.
Details the double frame coil kit for cancelling interferences, offering stable and sensitive operation.
Provides detection depth data for various coils and objects under specific operating conditions (DELAY 4 / GND 6).
Provides detection depth data for various coils and objects under specific operating conditions (DELAY 3).
Explains how to interpret generated maps, compare channels, and identify metal objects.
Guides on updating the device's firmware using a USB cable and computer.
Details electrical specifications of the DEEPMAX Z2, including frequency, power, and usage time.
Provides technical specifications for the optional Battery + GPS module, including satellites and protocol.
Lists the physical dimensions of the control box and frame coils.
General| Brand | Lorenz |
|---|---|
| Model | Z2 Series |
| Category | Metal Detector |
| Language | English |
To Next Page
