You may now reconnect power
to the doorbell and chime at the
breaker (see Figure 3).
Wait 5 minutes for the doorbell to fully
power on and press the doorbell’s
button to ensure that the chime is
operating correctly. Check section 11
for troubleshooting if needed.
Figure 3
B451AJ_QSG_TRILINGUAL_R1.indd 20B451AJ_QSG_TRILINGUAL_R1.indd 20 2021-03-10 1:01:05 PM2021-03-10 1:01:05 PM
To Next Page
Loading...
