What to do if my Lotus Toilets unit is not operating?
If your Lotus toilet unit isn't operating, first ensure the power cord is securely connected. Next, check if the power is turned off at the main unit. Finally, make sure you are sitting correctly on the seat so that the skin sensor switch can function properly.
How to fix Lotus ATS-500R Toilets when the water does not spray?
If the water does not spray from your Lotus Toilets, check if the water tank is filled. Also, make sure the water valve is open and the water filter (strainer) isn't clogged.
Why is the water pressure weak in my Lotus ATS-500R?
If you're experiencing weak water pressure with your Lotus Toilets, first check if the water pressure is set to “low”. Also, inspect the water filter (strainer) to ensure it is not clogged.
What to do if my Lotus Toilets is leaking water?
If water is leaking from your Lotus Toilets, ensure the plumbing is correctly connected. If the leak persists from the main unit, disconnect the unit and contact service personnel.
Why is the dryer not working on my Lotus Toilets?
If the dryer on your Lotus Toilets isn't working, make sure the skin sensor on the seat is touching the skin.
What to do if the nozzle doesn’t come out on Lotus Toilets?
If the nozzle doesn’t come out on your Lotus Toilets, make sure the skin sensor on the seat is touching the skin.
How to fix a shaking body unit on Lotus Toilets?
If the body unit of your Lotus Toilets shakes, tighten the bolt, but be careful not to over-tighten it.
Detailed requirements and procedures for proper electrical grounding to prevent shock and ensure safe operation.
Important warnings for safe operation, handling, and electrical safety.
Preliminary safety checks and requirements before beginning installation.
Specific electrical power and grounding needs for product operation.
Identification and description of the primary components of the main bidet seat.
Explanation of the functions and buttons on the main control panel.
Listing and identification of parts required for installing the bidet seat.
Overview of the remote control and basic operation key for the ATS-500R model.
Identification of the primary components of the ATS-500R bidet seat.
Parts list for installing the ATS-500R model.
Important safety and operational notes before starting the installation process.
Step-by-step instructions for physically installing the bidet seat onto the toilet.
Unique installation steps applicable only to the ATS-500R model, including remote mounting.
Steps to connect water supply and verify for any leaks after initial setup.
Connecting power and performing a basic function test to ensure operation.
Instructions on how to detach the bidet seat from the toilet for cleaning or maintenance.
How to sit on the seat correctly to activate the skin sensor for operation.
Introduction to the basic wash features like Rear Wash, Lady Wash, and Turbo Wash.
Guidance on using the warm air dryer, including optimal use with toilet paper.
How to adjust the temperature and levels of the warm air dryer function.
Explanation of the energy-saving mode and tips for conserving power.
How to control the nozzle's movement for wider washing coverage.
Managing skin sensor deactivation and turning the unit on/off.
Procedures for cleaning the nozzle assembly and the main body of the bidet seat.
Steps to clean the water filter (strainer) to maintain water pressure.
Instructions on how to drain water from the internal tank for maintenance or storage.
Specific steps to prepare the unit for cold weather or long-term storage.
Troubleshooting steps for common problems like no spray, unit not operating, or leaks.
Solutions for weak water pressure or when seat/water/dryer is not warm.
Diagnosing and fixing issues with the nozzle not coming out or the dryer not working.
Detailed technical data including power rating, water inlet type, and wash device capabilities.
Specifications related to the heated seat, warm air dryer, and safety features.
Physical dimensions, weight, and operating temperature ranges for the product.
Details on FCC rules, potential interference, and user guidance for correction.
Warnings regarding modifications and their effect on the user's authority and warranty.
Explanation of the limited warranty terms, coverage, and duration for retail buyers.
List of conditions and damages that are not covered by the product's warranty.
Instructions on how to complete and submit warranty registration for validation.
To Next Page
General