Introduction
Congratulations on your new Lotus Fireplace Insert
We hope and believe that it will give you many a warm hour. But before you
may truly benefit from your investment, you should read this guide thoroughly.
It provides some specific advice as to how you will benefit the most from your
fireplace insert – now, as well as in the years to come. This is why this guide
would be worth while keeping, like all other directions for use.
Lotus may look back on a long tradition, making our first productions back in
1979. Our production is now run at Langeskov, and exported to many European
markets. Lotus products are made to a fine Danish tradition, serving its owners
faithfully for years. So, once again congratulations on your new Lotus fireplace
insert – making for a warm and cosy beginning of an all new home life for you.
Technical Specifications
Wood stove data, testing to EN 13240/NS 3058/CE-mark
Model Flue gas
temperatur
e at
nominal °C
Output
kW
Flue gas
mass flow
g/s
Flue
Pa
Weight
Kg
Distance to inflammable material while
standing alone
Behind stove
mm
Next to stove mm
H470 320 6 5,3 12 95 350 350
H570 292 6 5,1 12 111 250 350
Fireplace Insert Assembly
Before your new fireplace insert will be ready to exude warmth and a cosy
atmosphere, you should read these lines thoroughly, reviewing the requirements
for the assembly and the environment. Also, reference is made to all local
regulations, including those referring to national and European standards, to be
met in the installation of your fireplace insert.
The hole size required for assembly appears from the leaflet material as well as
the line drawings on the last page of these instructions.
To Next Page
Loading...