ROLLING EDIT TOOL
TRACK SELECT FORWARD
TOOL
LINK
GO TO SEQUENCE START
OR END
PEN TOOL
TYPE TOOL
CONTROL DIAL
GO TO NEXT / PREVIOUS
MARKER
ZOOM
PAN
GO TO NEXT / PREVOUS
5 FRAMES
GO TO NEXT OR PREVIOUS
FRAME
TRIM
CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION
LETS YOU TO MOVE EDIT POINT BETWEEN TWO CLIPS
SELECTS ALL MATERIAL IN SEQUENSE FROM A POINT FORWARD. PRESS-
ING THE DIAL WILL RESET.
ALLOWS YOU TO LINK AND UNLINK VIDEO AND AUDIO FROM EACH
OTHER
LETS YOU JUMP DIRECTLY TO BEGINNING AND END OF A SEQUENCE.
PRESSING THE DIAL WILL RESET CHANGES.
YOU CAN CREATE KEYFRAMES WITH PEN TOOL STRAIGHT TO
MATERIAL IN TIMELINE.
LETS YOU TO TYPE ON VIDEO. PRESSING THE DIAL WILL RESET.
ROTATING CONTROL DIAL WILL GO TO NEXT OR PREVIOUS EDIT POINT.
PRESSING WILL RESET.
WILL GO TO THE NEXT OR PREVIOUS MARKER. PRESSING DIAL WILL
RESET.
LETS YOU TO ZOOM IN AND OUT IN TIMELINE, SOURCE MONITOR
AND PROJECT MONITOR. PRESSING THE DIAL TIMELINE
PRESSING FN AND ROTATING D1 LETS YOU PAN TIMELINE. PRESSING THE
DIAL WILL RESET.
ROTATING D2 WILL GO BACK OR FOWARD IN TIMELINE 5 FRAMES.
PRESSING D2 ADDS THE EDIT
PRESSING FN + ROTATING D2 WILL GO TO NEXT OR PREVIOUS FRAME.
PRESSING FN+D2 ADDS THE EDIT
PRESSING THE DIAL WILL GO TO THE CLOSEST EDIT POINT. SECOND
PUSH WILL TOGGLE IN / OUT TRIM. ROTATING WILL TRIM THE EDIT POINT.
L1
FN + L1
L2
FN + L2
L3
FN + L3
CONTROL
DIAL
FN + CON-
TROL DIAL
D1
FN + D1
D2
FN + D2
CLARITY
CUSTOMIZABLE BUTTONS L1L3 AND DIALS CONTROL DIAL, D1 & D2
To Next Page
Loading...