Need help?Do you have a question about the Lovato DMG Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Power Measurement | Active, Reactive, Apparent Power |
| Energy Measurement | Active, Reactive Energy |
| Measurement Type | Frequency, Power, Energy, Harmonics |
| Current Measurement | Up to 5A AC (direct) |
| Communication | RS-485, Modbus RTU |
| Protocols | Modbus RTU |
| Power Supply | 85-265 VAC |
| Safety Standards | IEC 61010 |
Introduces the DMG series digital multimeters and analyzers and their capabilities.
Details the Modbus communication protocol used by DMG series devices for data exchange.
Explains the Modbus RTU message structure, fields, and CRC calculation for reliable communication.
Describes the Modbus ASCII protocol, its message format, and usage scenarios.
Lists and explains key Modbus functions (03, 04, 06, 07, 16, 17) and their operational parameters.
Lists available electrical measurements provided via serial communication for various DMG models.
Lists parameters for monitoring energy quality according to the EN50160 standard.
Covers general device settings, utility parameters, password, and integration configurations.
Details parameters for configuring the device's Real-Time Clock (RTC) for accurate timekeeping.
Describes system events, their codes, and classification for monitoring device status and operations.
Guides on setting up the datalogger, including stopping logging, resetting memory, and setting time.
Explains how to set sampling time, sync data, manage memory, and select start signals for logging.
Details commands for rebooting, checking status, and saving datalogger settings to EEPROM.
Details the process for downloading stored data, searching records by date, and reading data.
To Next Page
