The Love N Care Glide Sleeper (BP 950) is a versatile bedside sleeper designed for infants aged 0-6 months, with a maximum weight capacity of 9 kg. This product functions as both a standalone crib and a co-sleeping unit, offering adjustable features to enhance comfort and safety for both the baby and the parent.
Function Description:
The Glide Sleeper serves as a secure and comfortable sleeping environment for infants. Its primary function is to provide a safe space for the baby to sleep, either independently or alongside the parent's bed in co-sleeping mode. The "Glide" feature suggests a gentle rocking or gliding motion, which can be activated and controlled via a built-in control panel. This motion is intended to soothe the baby and aid in sleep.
Important Technical Specifications:
- Model: BP 950
- Age Range: 0-6 months
- Maximum Weight: 9 kg
- Adult Bed Compatibility (Co-Sleeping Mode):
- Adult bed height: Must be at least 49cm from floor to top of adult mattress.
- Adult bed width: Must not exceed 180cm.
- Suitable for beds with an independent bed edge component.
- Mattress: Only the mattress provided with the crib should be used.
- Glide Levels: 3 adjustable speeds.
- Sound: 3 pre-loaded songs, including white noise.
- Timer: 15-minute or 30-minute options for the glide function.
Usage Features:
- Assembly: The manual provides clear instructions for assembling the Glide Sleeper, starting with connecting the legs to the end supports, then joining the end support units with round bars. The basket bars are fed through the fabric and connected to the end support units, followed by lining up and connecting the frame to the support unit via locking clips. Finally, the base of the crib is connected to clips on both ends.
- Height Adjustment: The crib's height can be adjusted by releasing a lever on both sides. This allows the crib unit to be lifted or lowered. An angled position is also possible, which can be beneficial for babies with reflux.
- Co-Sleeping Mode:
- To engage co-sleeping mode, the zip on the inside of the crib is lowered on both sides. Buttons under the frame are pressed, and the frame is slid upwards to release it from the clips, allowing the side section to hang down.
- The crib's height must be adjusted so that the top of the lowered section is below or in line with the top of the adult mattress.
- Crucially, co-sleeping mode should NOT be used if the adult mattress is lower than the lowest section of the dropped side of the crib.
- The glide function can be locked by engaging stoppers on both sides of the crib.
- Bed straps are provided to securely attach the bedside sleeper to the adult bed base. These straps are routed under and over the bed base, buckled under the bedside sleeper, and tightened until the sleeper is firmly attached.
- Safety Requirement: There must be no more than a 2cm gap between the bedside sleeper and the adult bed when in co-sleeping mode. The anchor strap must always be attached and securely buckled.
- The crib rail, when in the lower position for co-sleeping, must always be aligned with or lower than the height of the adult bed mattress.
- Control Panel:
- ON/OFF: A single press switches the unit on or off.
- GLIDE LEVEL: Pressing cycles through 3 different glide speeds. Users are warned to ensure glide stoppers are not in place before switching on the glide function.
- SOUND: Plays pre-loaded songs. A single press plays the first song; pressing and holding moves to the next track. Track 3 is white noise.
- VOLUME: Controlled by arrows located above the sound button.
- TIMER: Sets the glide function for either 15 or 30 minutes. Pressing once changes the time.
Maintenance Features:
The manual emphasizes the importance of regular inspection and proper assembly to prevent hazards. While specific cleaning instructions are not detailed in the provided excerpts, the general warnings suggest:
- Inspection: Assembly elements must always be securely fastened and inspected to prevent collapse or loose elements that could cause strangulation.
- Damage: Do not use the product if any parts are broken, damaged, or missing. Contact Love N Care for replacement parts and instructions. Do not replace parts yourself.
- Accessories: Only use accessories approved by the manufacturer.
- Cover: Never use the cover without the metal structure.
Safety Warnings (summarized from the manual):
- Always read and follow instructions carefully.
- Do not use the product if the child can sit up, kneel up, or stand up unaided.
- Avoid placing additional elements in the cot that could cause asphyxiation.
- Do not place the product near strings, curtains, cords, or other items that could cause strangulation.
- Ensure the crib is always placed on a horizontal floor.
- Do not fill gaps with pillows, blankets, or other items.
- Do not let children play near the crib unsupervised.
- When unsupervised, ensure the rail is always up, correctly fastened, and zips are fully closed.
- Do not use more than one mattress.
- Only use the mattress that comes with the crib.
- Always raise the drop side completely when the crib is not attached to the adult bed.
- Avoid placing the crib close to fire or other heat sources.
- Ensure the adult bed mattress is not lower than the lowest section of the dropped side of the crib in co-sleeping mode.
- To avoid the risk of the child's neck being caught on the top rail next to the adult bed, ensure this rail is not higher than the adult bed mattress.
- The attachment system to the adult bed and electrical cable should always be kept out of the crib and out of reach to avoid strangulation.
- Ensure all assembly devices and locking devices are correctly fitted.
Need help?
General
To Next Page
