6
Scuba3
Rubber cap to
shield against
sunlight
Backlit display
with icons and
animation
Waterproof
housing
Wireless
data transfer
via NFC
Simple keypad
with dual
functions
Integrated
vial
4. Guidelines for photometric measurements
- Use only blister tablets with black printing.
- Always add the reagent tablets to the water sample
straight from the foil without touching them with the
fingers.
- Close the blue lid on top of the sample chamber tightly
before zeroing / reading.
- Always ensure that the sample chamber, the lid and the
stirring rod are thoroughly rinsed when changing from
one test to the other.
Maintenance guidelines
- Keep the instrument in a clean condition.
- No solvent, abrasive materials or brushes should be used
to clean the instrument. Clean the sample chamber using
a soft tissue.
- Dry the instrument when not in use, store it under the
advised ambient conditions.
- Remove batteries and don´t close the battery lid if the
instrument is being stored for an extended period.
5. Instrument Overview
To Next Page
Loading...
