Need help?Do you have a question about the Lovibond scuba3s and is the answer not in the manual?
General| Model | Scuba 3S |
|---|---|
| Parameters | Free Chlorine, Total Chlorine, pH, Alkalinity, Cyanuric Acid |
| Light Source | LED |
| Detector | Silicon photodiode |
| Display | LCD |
| Power Supply | 2 x AAA batteries |
| Automatic Shut Off | Yes |
| Waterproof | Yes |
| Dimensions | 145 x 70 x 45 mm |
| IP Rating | IP68 |
| pH Range | 6.5 to 8.4 |
| Alkalinity Range | 0 - 300 mg/L |
| Cyanuric Acid Range | 0 - 160 mg/L |
| Measurement Range | Depends on parameter |
| Operating Temperature | 5 – 40 °C |
| Storage Temperature | -10 - 50°C |
Instructions for powering the device on and off.
How to choose measurement parameters on the device.
Method for collecting water samples for testing.
Instructions for closing the sample chamber.
Procedure for zeroing the device before measurement.
How to add reagent tablets to the sample.
Steps to crush and dissolve reagent tablets.
How to initiate the measurement test.
Explanation of integrated timers for reaction development.
How to view and interpret test results.
Viewing stored measurement results.
How to transfer measurement data from the device.
Procedures for deleting stored measurement data.
How to set or adjust the device's date.
How to set or adjust the device's time.
Explanation of various error codes and their meanings.
To Next Page
