8
6.3 Collect Sample:
Collect sample by dipping Scuba3s
into pool water multiple time.
Make sure the sample chamber is
filled completely.
6.4 Cover measuring chamber
Cover measuring chamber with the
rubber cap.
Make sure that the chamber is
tightly closed.
6.5 Perform Zero
Zero measurement sets a reference
point by eliminating the influence
of measuring chamber and sample.
It is required to perform zero before
each Test measurement.
Press Test key to perform zero.
When finished, the icon on the left
side on the display will change from
empty vial to full vial.
6.6 Add tablet
Add tablet reagent directly from
blister by pressing from top of the
blister as shown in the picture.
Refer to parameters list on the first
page to choose the appropriate
reagents for each test.
S
c
u
ba
3
To Next Page
Loading...
