LOWES AquaSource T802 User Manual

TM
1
HIGH-EFFICIENCY TOILET
ITEM #0098923
MODEL #T802
Español p. 15
Français p. 8
DO YOU HAVE?
Supply Line
Adjustable
Wrench
Putty Knife
Flathead
Screwdriver
Carpenter’s
Level
Hacksaw
NOTE: Items not included.
ARE YOU READY?
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING: Risk of hazardous gases. If new toilet is not
installed immediately after removing an old toilet, temporarily
gases from escaping. Observe local plumbing and building
codes.
CAUTION: Handle with care. Vitreous chinaware is glass-like
with sharp edges if broken. Do not drop or handle roughly.
Do not overtighten bolts.
If replacing an existing toilet, follow these general guidelines. (Not all
toilets and connections are the same. Therefore, these guidelines may
or may not apply.)
Remove Old Toilet
1.
dry remaining water from tank and bowl.
2. Disconnect and remove old water supply line.
3. Remove tank from bowl by removing old tank-to-bowl hardware.
4.
5.
or cover to block sewer gases from escaping.)
NOTE: Mounting surface must be clean and level before new
toilet is installed.
Estimated Installation: 55 Minutes
ATTACH YOUR RECEIPT
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-866-417-7564, 8 a.m. - 8 p.m., EST, Monday - Friday.
AB17242
AquaSource
®
is a registered trademark of LF, LLC.
All Rights Reserved.
Safety
Goggles

LOWES AquaSource T802 Specifications

General

Brand	LOWES
Model	AquaSource T802
Category	Toilets
Language	English

Summary

Installation Preparation

Supply Line

Required supply line for toilet installation.

Adjustable Wrench

Required adjustable wrench for toilet installation.

Putty Knife

Required putty knife for toilet installation.

Flathead Screwdriver

Required flathead screwdriver for toilet installation.

Carpenter's Level

Required carpenter's level for toilet installation.

Hacksaw

Required hacksaw for toilet installation.

Safety Goggles

Required safety goggles for toilet installation.

Attach Receipt

Instruction to attach the product receipt.

Pre-Installation Safety Warnings

Warnings about hazardous gases and cautions for handling vitreous chinaware.

Removing Old Toilet Steps

Steps for removing the old toilet, including water shut-off and disconnecting parts.

Package Contents

Toilet Components

Lists and illustrates the main parts of the toilet, including bowl, tank, lid, and seat.

Hardware Components

Details and illustrates all hardware included for toilet assembly and installation.

Installation Instructions

Remove Existing Bolts & Wax

Instructions on removing old bolts and wax from the toilet flange.

Install Floor Bolts

Guidance on inspecting and installing floor bolts into the toilet flange.

Install Wax Ring

Steps for correctly applying the wax ring to the toilet bowl outlet.

Position Bowl on Floor Flange

Instructions for carefully placing the toilet bowl onto the floor flange and wax ring.

Secure Bowl to Floor

Details on fastening the toilet bowl to the floor using nuts and caps.

Install Tank-to-Bowl Seal

Steps for installing the seal between the tank and the bowl.

Install Tank on the Bowl

Instructions for mounting the tank onto the toilet bowl and securing it.

Attach Water Supply Line

Guidance on connecting the water supply line to the tank and shut-off valve.

Install Seat

Steps for attaching the toilet seat and lid to the bowl.

Install Flush Handle Assembly

Instructions for installing the flush handle assembly to the tank.

Connect Flapper Chain

Details on connecting the flapper chain to the flush handle assembly.

Take Off Rubber Band

Instruction to remove a rubber band from the flush valve before use.

Care and Maintenance

Cleaning Precautions

Important cautions regarding cleaning products and methods for the toilet and seat.

One-Year Limited Warranty

Details of the manufacturer's one-year limited warranty for vitreous chinaware fixtures.

Replacement Parts List

Part Identification

Illustrates and lists all replacement parts with their corresponding part numbers.