Error Codes
P2 – Water drawer is full or drawer is not in the right position. Empty
the drawer and replace in the correct position.
AS - Humidity module sensor error. Unplug the unit and plug it back in. If
error repeats, call customer service.
ES - Tube Temperature sensor error. Unplug the unit and plug it back in.
If error repeats, call customer service.
EC -Refrigerant leakage detection. With this new technology, the display
area will appear EC when the unit detects refrigerant leakage, call
customer service
USING YOUR DEHUMIDIFIER
Page 12
To Next Page
Loading...
