Error Codes
AS – Humidity Sensor Error. Unplug the unit and plug it back in. if the
error continues, call customer service.
ES – Temperature Sensor Error – Unplug the unit and plug it back in. If
error continues, call customer service.
P1 – Unit is defrosting. Allow the unit time to automatically defrost. The
error code will disappear once the unit has defrosted.
P2 – Water drawer is full or drawer is not in the right position. Empty
the drawer and replace in the correct position.
E3 – Unit malfunction – unplug the unit and plug back in. If the error
repeats, call customer service.
EC -Refrigerant leakage detection. With this new technology, the display
area will appear EC when the unit detects refrigerant leakage, call
customer service.
USING YOUR DEHUMIDIFIER
Page 12
To Next Page
Loading...
