Need help?Do you have a question about the Loxjie D30 and is the answer not in the manual?
General| DAC Chip | ES9038Q2M |
|---|---|
| Amplifier Type | Class D |
| Inputs | USB, Optical, Coaxial, Bluetooth |
| Output Impedance | 4Ω-8Ω |
| Bluetooth Version | 5.0 |
| Display | OLED |
| Outputs | RCA |
| Optical/Coaxial Sampling Rate | Up to 24bit/192kHz |
| Bluetooth Codec | SBC, AAC |
Supports MQA full decoding and MQA-CD via optical/coaxial input.
Features ESS ES9068AS DAC chip with low distortion for high-fidelity audio.
Utilizes 2nd gen XMOS for high-res PCM and DSD support.
Integrated high-performance headphone amplifier for enhanced audio.
Available input interfaces: USB, Optical, Coaxial, Bluetooth.
List of input types supported by the device.
Headphone amplifier output power: 110mW X 2 (32Ω).
Line output level: 2.0 Vrms.
Key audio performance characteristics.
Total Harmonic Distortion + Noise (THD+N): 0.0001% (-120dB).
Dynamic Range: 123dB.
Signal-to-Noise Ratio (SNR): 123dB.
Output Impedance: Line 100Ω, Headphone 1.1Ω.
Bluetooth Specification: 5.0 (supports SBC, AAC, aptX, aptX HD).
Other specifications including power, size, and weight.
Power Consumption: 5W.
Standby Power: <0.5W.
Download firmware and drivers from the official website.
Function of the power button on the remote control.
Mute function and long press for Bluetooth reconnection.
Menu/OK button for navigation and confirmation.
Button to enter the menu settings.
Button to exit the menu.
Output switching and long press for output inversion function.
Button to switch between input sources.
Increase volume level.
Decrease volume level.
Shows the sampling rate of the audio signal.
Instructions for resetting device settings or Bluetooth pairing.
Instructions for playing MQA audio files on the D30.
To Next Page
