16
■ Precaution of Storage
When storing a circuit breaker for a long term,
1) Keep the breaker at OFF position and TRIP condition.
2) Avoid corrosive gas.
3) Avoid humidity. (relative humidity : Max. 85%)
1) Store the breaker in a dust free and dry environment.
2) Keep the breaker in OFF position or in DISCHARGED condition.
3) Cover the breaker with a vinyl sheet or a similar cover. When putting the breaker into service
after long term storage, it is unnecessary to lubricate the parts of the breakers.
4) Keep the breaker indoor as it was packaged around 15℃ and under 50% of humidity.
5) Standard packing condition for domestic portage is not suited to outdoor storage.
If you cannot keep the maintenance above, you should inspect a degree of the damages before
you install the products.
6) Unsuitable keeping does not guarantee good qualities of the products and could occur
additional danger of an accident.
■ Storage method
G. Storage
1. Storage
■ Precaution of Storage
Avoid corrosive gas.
Keep the breaker at OFF
position and TRIP
condition
Avoid humidity.
(relative humidity : Max.85%)
To Next Page
Loading...
