Need help?Do you have a question about the LS Industrial Systems TS1600 Series and is the answer not in the manual?
General| Standard | IEC 60947-2 |
|---|---|
| Trip Characteristics | Fixed, Adjustable |
| Operating Temperature | -25°C to +70°C |
| Poles | 3P, 4P |
| Rated Voltage (Ue) | AC 690V |
| Breaking Capacity (Icu) | 50kA - 100kA |
| Trip Unit Type | Electronic |
| Rated Current | 16A - 1600A |
| Rated Voltage | AC 690V |
| Breaking Capacity | 50kA - 100kA |
| Standards | IEC 60947-2 |
| Number of Poles | 3, 4 |
Outlines general safety operation, qualified personnel, and hazard definitions.
Details critical dangers and cautions for installation and operation.
Explains the basic functions and breaking principles of the MCCB.
Details safety precautions, dangers, and warnings for MCCB installation.
Details protection settings for N, NV, and A types, including time delays.
Details protection settings for P and S types, including PTA and other protections.
Details other protection settings such as voltage and frequency.
Provides characteristic curves for long-time and short-time delay protection.
Provides characteristic curves for instantaneous and ground fault protection.
Provides characteristic curves for the Inverse Definite Minimum Time Lag (IDMTL) protection.
Outlines inspection cycles, voltage tests, and routine checks for MCCBs.
Details inspection methods, post-fault checks, and replacement cycles.
Lists common abnormal conditions and their solutions for circuit breakers.
Lists common abnormal conditions and their solutions for MCCB accessories.
Provides control circuit wiring diagrams and terminal descriptions.
To Next Page
