28
H. Installation and Handling
6. Installation of accessories and handling
■ Rotary handle
- Extended rotary handle
5. ON/OFF/TRIP Test
SCREW,(+)PH,P.S/W,
M5,L18 4ea
4. Dimension of door cut and Installing Handle
6. Locking System
• If the door is opened with
much pressure
when the position of handle.
is ON or TRIP, the handle
lock lever will be damaged.
Please open the door
after rotating release lever
open OK
Release
lever
Locking at
ON or OFF
position
TRIP POSITION
③
①
②
ON
RESET
RESET POSITION ON POSITION
OFF
OFF POSITION
OFF State
ON State
door locking
Ф5~6
1. In case of disassembling and assembling the main cover, screw should be tightened in specific torque of1.5N.m (15.3kgf.cm)
2. In case of disassembling and assembling the main cover by over tightening torque, the parts of MCCB can be damaged.
To Next Page
Loading...
