LS MTRON KTFM-84S - User Manual

To Next Page

WARRANTY CONDITIONS

Warranty Coverage :

Warranty Provisions :

▶ Compensation is not paid for physical harm, deadlock, resulting damages or other losses.

Right To Make Design and Product Changes :

It is further understood and agreed that the defect should be immediately reported to the Selling

Dealer. The Selling Dealer will generally perform Warranty repairs or replacements and the

Purchaser shall deliver the LS Mtron Mower to the Dealer's place of business or repair.

The obligation of LS Mtron to the Purchaser under this Warranty is limited to the repair or

replacement of defective parts by an authorized LS Mtron dealer. Repair or replacement in

accordance with this Warranty shall constitute fulfillment of all liabilities of LS Mtron and the

Selling Dealer in respect to LS Mtron Mowers.

LS Mtron Tractor Division, herein referred to as LS Mtron, undertakes to replace or repair any part

of a LS Mower where damage has been proven to be caused by defects in material or

workmanship.

This Warranty is valid for a period of 1 year from the date of the original retail sale. Parts

replaced or repaired under the terms of this Warranty are guaranteed only until the original

warranty expires. Warranty only applies to the original purchaser.

▶ The purchaser shall at all times in the operation of any LS Mtron Product, use those brands

and grades of lubricating oils, lubricants or fuel and spare parts officially approved by LS Mtron.

▶ The LS Mtron Mowers shall have been used in accordance with the procedures specified in the

Operator's Manual. This Warranty does not extend to damage resulting from misapplication,

abuse, misuse, failure to preform maintenance, negligence, fire, accidents or changes or faulty

mounting carried out by the Purchaser. When making a Warranty exchange of parts, the

Purchaser shall compensate LS Mtron for the time that the parts have been used if they have

been exposed to extreme wear.

There are no warranties beyond those which expressly appear herein. Any implied warranty of

merchantability or fitness for a particular purpose is specifically exclude here from.

LS Mtron reserves the right to make changes in the design and other changes in its LS Mtron

Products at any time without incurring any obligation with respect to any product previously

ordered, sold or shipped.

▶ Temporary repairs or additional costs due to the work being performed after normal working

hours will not be compensated.

▶ The above warranty is in lieu of all other warranties on LS Mtron's behalf and neither party

assumes any other liability in connection with LS Mtron's Products.

▶ To obtain warranty service, the Purchaser must (1) report the product defect to an authorized

LS Mtron dealer and request repair within the applicable warranty term and (2) present evidence

of purchase.

▶ The Warranty shall be void if the LS Mtron Mower has been altered or repaired outside of a LS

Mtron dealership or travel of dealer personnel to customer location for Warranty repair. The

customer shall also pay any premium for overtime labor requested by the customer.

LS Mtron's liability under this warranty is subject to the observance by the Purchaser of the

following provisions:

- 1 -

Main Page

Need help?

Do you have a question about the LS MTRON KTFM-84S and is the answer not in the manual?

This document describes the LS Mtron Mower, a device designed for cutting grass.

Function Description

The LS Mtron Mower is a piece of equipment used for lawn care, specifically for cutting grass. It is designed to be operated in conjunction with a tractor, as indicated by references to PTO (Power Take-Off) and tractor operation. The manual emphasizes safety precautions and proper maintenance for effective and safe operation.

Important Technical Specifications

The Mower Specification section provides detailed technical data for the KTFM-84S model:

Mower Model: KTFM-84S
Cutting Width: 84 inches
Overall Width: 86 inches
Discharge: Rear discharge
Weight, Machine: 728 Lbs
Max. PTO-hp: Not to exceed 60 hp
Min. PTO-hp: 25 hp
Cutting Height: 3/4" – 4 3/4"
Deck Material: 3/8"
Blades Sizes: 2 3/8" x 1/4" x 28 3/4"
Blade Overlap: 1 3/16"
Blade RPM: 2,160
Hitch: Cat-1

The manual also includes torque tightening charts for both SAE and Metric hardware, specifying minimum hardware tightening torques for various bolt sizes and grades. For example, a 1/4" SAE Grade 2 bolt requires 6 lbs-ft (72 in-lbs) of torque, while a M8 Metric Grade 8.8 bolt requires 20 N-m (15 lbs-ft) of torque.

Usage Features

The mower is designed for ease of use and adjustment:

Compatibility: It is designed to be combined with 2HP~40HP tractors equipped with a category-1 3-point link system and a 540-rpm clockwise PTO.
Cutting Height Adjustment: The cutting height can be adjusted by changing the position of the wheels. Raising the wheels increases the cutting height, and lowering them decreases it. The manual advises making sure all wheels are at the same height or both sides.
Belt Tension Adjustment: The tension of the belts can be adjusted to ensure the machine works correctly and to reduce wear of rotating parts. This involves loosening bolts, unscrewing nuts, and turning screws in specific directions to achieve the correct tension.
Safety Features: The manual highlights numerous safety precautions, including:
- Always disengage the PTO for transport.
- Avoid touching the tractor wheel and lower arms.
- Check that the PTO does not touch the front of the mower deck.
- Travel at a safe speed.
- Wear suitable clothing and personal protective equipment.
- Ensure all guards are in place.
- Maintain a safe distance from rotating parts.
- Shut off the engine and engage the parking brake before performing maintenance or adjustments.
Start-Up and Shut-Down:
- Start-Up: After carrying out mower setup, the equipment is ready for use. Start the engine, engage the PTO, and ensure correct operation of the mower before continuing.
- Shut-Down: Recommended activities for long periods of time include cleaning and drying the equipment, inspecting and replacing damaged or worn parts, and tightening all hardware according to the torque tightening chart. The machine should be lubricated and covered, then stored in a dry place.

Maintenance Features

The manual provides comprehensive maintenance instructions to ensure the longevity and optimal performance of the mower:

Lubrication and Maintenance Schedule:
- Gear box Oil Level: Check daily/10 hours
- Gear box Oil: Lubricate daily/10 hours
- Pulley Ass'y: Lubricate daily/10 hours
- Tire hinge: Check daily/10 hours
- Belt tension: Check daily/10 hours
- All the hardwares: Check visually and Re-Torque daily/10 hours
Grease: The manual specifies "GREASE" points daily (10 hours) and refers to the Tractor Operator's Manual for lubricant recommendations.
Gear Box Oil: After the first 50 working hours, and later, every 800 working hours, replace the oil in the gear box. Use oil SAE EP 80W90.
Blade Replacement: Instructions are provided for safely replacing blades, emphasizing the need to turn off the tractor engine, engage the parking brake, disengage the power take-off, raise the mower, and use sturdy supports.
Spare Parts: The manual states that only original LS Mtron spare parts should be used for the best lawn mower performance. Requests for spare parts should refer to the Part Illustrations. Information required for ordering includes equipment type and width, part number, description, and quantity.
Cleaning: Regular cleaning and drying of the equipment are recommended as part of the shut-down procedure.
Inspection: Inspect the equipment and replace damaged or worn parts if necessary.
Tightening Hardware: All hardware should be tightened according to the torque tightening chart.

The document also includes a "Warranty Coverage" section, detailing the terms and conditions of the warranty, including the duration (1 year from the date of original retail sale), what is covered, and what voids the warranty (e.g., improper use, lack of maintenance, unauthorized modifications). It also mentions "Warranty Provisions" for the LS Mtron's liability under warranty.

LS MTRON KTFM-84S Specifications

General

Brand	LS MTRON
Model	KTFM-84S
Category	Lawn Mower
Language	English