Need help?Do you have a question about the LSI MegaRAID SAS 9267-8i and is the answer not in the manual?
Details the MegaRAID SAS 9267-8i controller's PCI-Express 3.0, memory, and connectivity.
Handle the RAID controller carefully in a static-free environment and check for any damage.
Turn off and disconnect the computer, then remove the chassis cover for access.
Locate and understand the function of various jumpers and connectors on the RAID controller.
Insert the controller into an appropriate PCI Express slot and secure it to the computer chassis.
Connect SAS/SATA devices to the controller using SAS cables, then power on.
Access the WebBIOS utility by pressing Ctrl+H to configure drive groups and virtual drives.
To Next Page
General