LSIS EMPR Series - Page 85

Before starting the motor, proceed as follows :
1. Connect the display unit to the main unit of the device and
then turn on. Verify that Power LED is switched on and
the measurement screen is displayed.





󾖹󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖼







󾖹󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖼
2. Verify the operations of Test function and Reset key through trip.

















3. Check the settings.







Operation and Setting
84 Electronic Motor Protection Relays