LSIS XP30-BTE - Page 93

Appendix 1. Troubleshooting
App.1-18
Object
Error code
Occurrence
location
Error message Reason and measure
Type Address
0x2B XGT Panel
There's no downloaded
file.
To reboot the engine is not available because
of wrong file which is developed by
downloading wrong module or
communication error.
Touch \\FlashDisk\LSISProduct\Update.exe
and set the device as update mode. Then
update again. If this symptom is repeated,
contact Customer Service Center.
0x2C XGT Panel
(improper
communication
command)
Current state is not
authorized.
To reboot the engine is not available because
of wrong file which is developed by
downloading wrong module or
communication error.
Touch \\FlashDisk\LSISProduct\Update.exe
and set the device as update mode. Then
update again. If this symptom is repeated,
contact Customer Service Center.
XGT panel
S/W update
0x30
0x2D XGT Panel
(improper
communication
command)
A module to download is
not listed up yet.
To reboot the engine is not available because
of wrong file which is developed by
downloading wrong module or
communication error.
Touch \\FlashDisk\LSISProduct\Update.exe
and set the device as update mode. Then
update again. If this symptom is repeated,
contact Customer Service Center.
0x2E
XGT Panel
Failed to Initialize Update
program.
XGT can’t be set as update mode because of
XGT Panel error. After downloading new XGT
Panel module through homepage, etc., copy
UpdateNew.exe file among new module to
the \\FlashDisk\LSISProduct\ directory of XGT
Panel through the movable storage
equipment. Then reboot the XGT Panel and
go update mode and update again. If this
symptom is repeated, contact Customer
Service Center.