Chapter 7. Storage Function
7-1
Chapter 7 Storage Function
7.1 General Introduction
Downloading the user project made in XP-Builder from PC, uploading the project stored in the device to PC, updating the device
and etc are available through connection with XGT Panel with Serial cable or Ethernet cable generally. However, when those
connections are not available, you can use CF card, USB storage equipment
1. If you touch [Storage Function], the following dialog box shows.
2. In case of downloading the project by using CF card or USB storage equipment, touch [Project Download] button.
3. In case of transmitting the project data stored in the device to CF card or USB storage equipment, touch [Project Upload]
button.
4. In case of updating the XGT Panel with XGT Panel Software stored in CF card or USB Storage equipment, touch [XGT
Panel Update]
To Next Page
Loading...
