7.2 Downloading Project through the Storage Equipment
1. If you touch [Project Download], the following dialog shows.
2. In case of selecting [USB], the directory list under the path, \USB Storage\XP_Project\ shows. In case of selecting [CF],
the directory list under the path, \Storage Card\XP_Project\ shows. In case of downloading the project by using storage
equipment, the project should be saved in the one lower directory between those two directories.
3. Select one among directory lists and touch [OK]. Then downloading will start.
7.3 Uploading Project through the Storage Equipment
1. If you touch [Project Upload], the following dialog shows.
2. In case of selecting [USB], the path, \USB Storage\XP_Backup\, shows. In case of selecting [CF], the path, \Storage
Card\XP_Backup\, shows. Select one between two.
3. If you touch [OK] button, project backup file is transmitted to the selected path.
4. The project backup file is saved when Download project backup file is selected when downloading the project.
If you don’t select, project backup file is not saved in the device and transmission to the storage equipment is not
available.
To Next Page
Loading...
