22
TS212
(continued)
Cabinet
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Controls
Volume, power on/off with LED, clip limiter with LED, ground lift
Protection
Electronic clip, thermal and transducer overdrive protection
Power AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
Dimensions
(width x depth x height)
14.04” x 13.80” x 23.28”
357 x 351 x 591 mm
Weight
28.35 lbs.
12.86 kg
TS215
Output Power
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
Low Frequenc
1” (25 mm) neodymium driver
Crossover
2 kHz
Maximum SPL
129 dB peak, 126 dB continuous (dB-SPL @ 1 m)
Frequency Response
50 Hz – 20 kHz (+ 3 dB)
Frequency Range
43 Hz – 22 kHz (-10 dB)
Coverage
80°/100° H x 60° V nominal
Connectors
(2) 1/4” (6.35 mm) TRS or XLR inputs
(1) XLR link output
Cabinet
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Controls
Volume, power on/off with LED, clip limiter with LED, ground lift
Protection
Electronic clip, thermal and transducer overdrive protection
Power AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
Dimensions
(width x depth x height)
15.60” x 14.04” x 25.68”
396 x 357 x 652 mm
Weight
32.72 lbs.
14.84 kg
Trademarks and Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other
product or company names are trademarks or registered trademarks of their respective owners.
To Next Page