To Next PageTo Next Page
Need help?Do you have a question about the LTR 2000 Series and is the answer not in the manual?
General| Brand | LTR |
|---|---|
| Model | 2000 Series |
| Category | Measuring Instruments |
| Language | English |
Details suitability for gauge, differential, or absolute measurements and media restrictions.
Instructions for AA/equivalent battery installation and replacement when the symbol appears.
Ensures waterproof rating is maintained by tightening battery compartment screws.
Describes power on/off functions and automatic switch-off behavior.
Instructions to press and hold the ON key to activate the backlight.
Indicates 'Out' will appear on display if pressure exceeds the scale range.
Enables correction of indicated ambient pressure for specific models.
Pressing key freezes the display with a symbol appearing.
Details how to fit a hose to the instrument's input port.
Instructions for connecting and operating a hand pump to generate pressure, with model restrictions.
Averages last four measurements for a more stable reading.
Allows selection of required units of pressure, saved upon switch-off.
Instrument displays alternating symbols and current reading, max, min, or average.
Feature displays readings to the best resolution, can be turned off by pressing A/R key.
Models enable storing/retrieving up to 250 readings and outputting to PC/printer.
Procedure to set the internal clock for year, month, day, hour, and minute.
Allows readings to be stored as and when required, up to 50 readings.
Readings are taken automatically at a preset time interval, up to 250 readings.
Feature to view stored data, output to PC/printer, or erase stored data.
Press X key in MAX/MIN mode to show average reading.
Procedure for setting up leak test parameters like pre-stress pressure, start pressure, and test time.
Describes how to apply pressure, bleed system, and interpret PASS or FAIL results.
Procedure for selecting transducer range and input voltage range for specific models.
Details wiring connections for Red, Blue, Green, and Yellow wires for transducers.
Allows user to define a scale percentage for a custom scaling of the display.
Provides accuracy specifications for different temperature ranges.
Details the two-year warranty against faulty workmanship and materials.
