To Next Page
A
Ashley SuttonAug 5, 2025
What to do if LTR BSG Service Equipment has pump suction failure?
- LLucas MartinezAug 6, 2025
If the LTR Service Equipment experiences pump suction failure, there are several potential causes. First, check if the original brake fluid container is empty and replace it if necessary. Next, ensure the pressure regulator is not set to "MINUS" and adjust it to the correct operating pressure. Also, inspect the suction hose for any kinks and remove them, replacing the hose if it's defective. Finally, examine the filter on the suction hose for clogs and clean or replace it as needed.
General