Program Card Access – Add Person
Go to NVMSv3. Click the Menu Icon > Access Control > Person
Click +Add to add a person… (Follow the steps 1,2,3, etc.)
On step #5, select your LTH-301m Reader to read in the card from the device. You can also manually type in the card number. A manually
entered card number must match the physical card number itself.
Program Card Access – Add Permission
Go to the Access Control section
1. Go to Authorization > Access Group
2. Click +Add
3. Give an appropriate permission name.
4. Select the Time Template (All-Day
Authorized by default).
5. Select Person to add.
6. Select the door.
7. Click Save.
8. Select the Permission.
9. Apply changes.
To Next Page
Loading...
