Unlock Door from the Outdoor Keypad: Unlocking the door using the permission password (Outdoor Station support up to 3 passwords)
Dial-in # permission password # for unlocking with public code.
E.G dial-in #123123# for password= 123123
Each Indoor station room number can support with 1 extra password. If you want to use this feature,
Dial-in # Room(number) Password(number) # for unlocking with room password.
E.G dial-in #101123123# with room 101 and password 123123
Outdoor to Indoor:
Use the Outdoor Station’s Name Tag button to call the Room number.
Push the nametag button on the outdoor station, it should start to ringing. The ring tone should sound like a busy tone.
If you have the sub-module LTH-M201-IM indicator module, it can display the call has been picking up by the person when the ringing
stops. If you got the message “calling fail”, that means to connect is not success or the room programming is not finish yet.
Use Outdoor Station’s Keypad to call the Room number.
Dial-in the room number and ending with the pound button.
E.G dial 101# =call Room 101
Use Outdoor Station’s Name Tag button to call Mobile App.
The mobile app is using LTS Connect. You need to create an account and adding the QR code.
The QR code only exists in the 1
st
Indoor Station configuration panel.
If you program it correctly, it will call the indoor station and mobile app at the same time when visitors press the name tag button.
Indoor Station to Indoor Station:
Calling from Indoor Station to Sub Indoor Station:
If you are dialing to another Indoor Station, dial “0 – Extension”,
E.G dial 0-1 to call extension-1 sub indoor station Dial 0-0 to call the previous Indoor station connected.
(0 indicates for the main unit and the appropriate extension for each sub/slave indoor#)
Calling from Indoor Station to another location’s Indoor station
(Calling separate Indoor Station; located in the Extended Outdoor Station)
If you are dialing a separate room, dial in Community – Building – Unit – Room Number followed by the call button.
E.G dial 1-1-1-101 + Dial.
To Next Page
Loading...
