Do you have a question about the LU-VE FHD Series and is the answer not in the manual?
Brand | LU-VE |
---|---|
Model | FHD Series |
Category | Air Conditioner |
Language | English |
Declaration of compliance with EC Machine Directive and other relevant standards.
Warnings for personal injury or equipment damage due to inattention to instructions.
Details product material composition for proper disposal and refrigerant handling.
Verify lifting device integrity and secure fixing before lifting the unit.
Steps for lifting and properly securing the unit to the ceiling.
Diagrams and tables detailing unit connections and required fittings.
Specific instructions for installing Jet-O-Matic connectors.
Ensure supply circuit is closed before connecting collectors/distributors.
Connect water drain tubing after closing the drain pan.
Direct flame away from the machine during welding operations.
Ensure power line circuit is open before performing electrical wiring.
Feed cables, connect components as per wiring diagrams shown.
Install defrost thermostat for optimal unit cooler performance.
Measure key temperatures (Ts', Te, Trs) and pressures for unit operation.
Adjust valve overheating for optimal unit cooler performance.
Specifications for electric defrost heater wattage and types.
Details power consumption and current for fan motors.
Connection diagrams for standard and optional fan motors.
Potential causes for motor non-operation, such as faulty capacitors.
Always switch off electricity supply before performing maintenance.
Steps to safely replace electric heating elements.
Steps to safely replace fan motors.
Information on the application of the automatic pump for water discharge.
Step-by-step guide for assembling the automatic water drain pump.
Operating pressures and materials for various components.
Orifice selection guide for Danfoss TES 2 valve based on conditions.
Procedure for adjusting the thermostatic valve overheating.
Details LU-VE Group certifications and product data.