To Next PageTo Next Page
Need help?Do you have a question about the LU-VE SHVN Series and is the answer not in the manual?
Recommended distances and clearances for vertical unit placement.
Instructions for installing windbracing to secure vertical units.
Guide to attaching mounting feet for H/V model vertical installations.
Specifics on connection types and sizes for SHL Special series.
Wiring diagram for high-speed motor configuration.
Wiring diagram for low-speed motor configuration.
Electrical schematics for pre-wired unit connections.
Guide to using the main service isolator switch.
Information on the location of the model identification label.
Step-by-step guide for cleaning units using a water spray method.
Recommended distances and clearances for vertical unit placement.
Instructions for installing windbracing to secure vertical units.
Guide to attaching mounting feet for H/V model vertical installations.
Specifics on connection types and sizes for SHL Special series.
Wiring diagram for high-speed motor configuration.
Wiring diagram for low-speed motor configuration.
Electrical schematics for pre-wired unit connections.
Guide to using the main service isolator switch.
Information on the location of the model identification label.
Step-by-step guide for cleaning units using a water spray method.
General| Model | SHVN Series |
|---|---|
| Category | Air Conditioner |
| Cooling Capacity | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Refrigerant | R404A, R507, R134a |
| Fan Diameter (mm) | 500 |
| Number of Fans | 1 |
| Airflow (m3/h) | Up to 18000 |
| Sound Pressure Level dB(A) | 60-70 |
| Coil Material | Copper tubes with aluminum fins |
| Air Flow Rate | Up to 18000 m3/h |
| Noise Level | 60-70 dB(A) |
