LUCCI Air ALLO - Care and Cleaning; FAQ and Troubleshooting

Compact Air Purifier Instructions
7 | P a g e
CARE & CLEANING
NOTE: Always turn OFF the power at the mains switch before performing any maintenance or
attempting to clean your appliance.
• Clean the inlet & outlet of the appliance regularly. To clean, wipe with a damp clean cloth with NO
organic solvents or cleaners.
• Do not soak or immerse the product in the water or other liquids. It could damage the product and create
the possibility of an electrical shock.
• Use a dry cloth, gently wipe off any dust on the filter regularly. Do not wash the filter with water.
• Do not try to use the vacuum cleaner to clean the filter. Replace filter with a new one if the indicator to
replace the filter is on.
FAQ & Trouble Shooting
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTION
Does not work
- Is it plugged into the power socket?
- Is the filter replacing indicator
flashing in red?
- Check and plug into the power
socket properly.
- Replace with the new filter.
Poor performance
- Is there any dust on the surface of
the pre-filter?
- Is there anything blocking the air
inlet/outlet?
- Clean the dust of the filter with
a dry cloth.
- Keep the required clearance.
Significant noise
- Is there anything blocking the air
inlet/outlet?
- Is the appliance tilted?
- Keep the required clearance.
- Place the appliance on the flat
& stable surface.
Unpleasant smell
- It is a normal phenomenon that the
machine emits the smell of plastic
for the first time of use.
- Is there any dust on the surface of
the pre-filter?
- Turn on the appliance for a
couple of hours.
- Clean the dust of the filter with
a dry cloth.
The indicator to replace
the filter is still flashing
after filter replacement
- The reminder is not reset.
- Press the power button for 7s to
reset.
NOTE: If the problem can not be solved by the suggested solutions, contact the supplier for further
instruction. DO NOT try to disassemble the appliance in any circumstances.