3
To place a call using an AD list button or access
code
1 Press or or
or Dial appropriate AD List access code:
• Personal __________
• Group __________
• System __________
2 Dial desired list item (1, 2, 3...).
To automatically place another call to an extension
that is frequently busy
1 During call attempt press softkey below AutCB
or Press
or Dial Automatic Callback access code before call
attempt ________.
2 Hang up.
• You hear a 3-burst priority ring when both you
and the called extension are idle.
Pick up handset to be connected to call.
To cancel Automatic Callback
1 While off-hook, press softkey below AutCB again
or Press again
or Dial Automatic Callback cancel code ________.
To answer a bridged call
1 Press call appearance button of bridged call and lift
handset or press .
NOTE: If you terminal has Ringing Appearance
Preference, just lift the handset or press .
To prevent other bridged terminals from entering a
call (on a per call basis)
1 Press the softkey below Excl while active on a call
or Press while connected to the call.
NOTE: Pressing the softkey below Excl or
pressing again reactivates bridging.
AUTOMATIC CALLBACK
BRIDGING/MANUAL EXCLUSION
To Next Page
Loading...
