9
NOTE: To use this feature, your voice terminal must
be set for the Speakerphone (speak and listen)
feature.
To place/answer a call without lifting the handset,
or to use speakerphone with any feature
1 Press .
2 Place or answer call, or access selected feature.
3 Adjust speakerphone volume if necessary:
To raise the volume, press the right half of the
Volume control button labeled ; to lower the
volume, press the left half of the Volume control
button labeled .
To prevent the other party from hearing you
1 Press .
• Red Mute light goes on.
2 Press again to resume talking to party.
• Red Mute light goes off.
To change from speakerphone to handset
1 Pick up handset and talk.
To change from handset to speakerphone
1 Press .
2 Hang up handset.
To end a speakerphone call
1 Press again to hang up.
To test the lights and the display on your voice
terminal
1 Press and hold down .
• Green Test light goes on.
• Button lights go on in two separate groups, and
all display segments fill in.
2 To end test, release .
SPEAKERPHONE
TEST
Speaker
Mute
Mute
Speaker
Speaker
Test
Test
8434dx.qref.def2.fm Page 9 Friday, March 27, 1998 10:34 AM
To Next Page
Loading...
