363-205-401 Power Up:
Issue 7, March 1997 Page 1 of 4
DLP-519
Install 336A Rectifiers in J1C182BD Power Shelf
SUMMARY:
Insert
336A RECTIFIER
into power shelf. Measure −54 to −55 V DC
between
- (1A/mV)
and
+ (VOLTAGE)
on the power shelf (bottom 2 jacks). Unseat
336A RECTIFIER
and repeat for additional
336A RECTIFIER
s. Reseat all
336A
RECTIFIER
s.
1.
NOTE:
Three
336A RECTIFIER
s are suggested for one string of batteries and
an additional two
336A RECTIFIER
s (total of five) are required for a
second string of batteries.
Get required number of
336A RECTIFIER
s and inspect for possible physical
damage.
2. All
BATTERY CHARGER
s must be unseated throughout this procedure.
Verify that fuse on
336A RECTIFIER
s (Figure 1) is not blown.
To Next Page
Loading...
