Lucent Technologies SLC 5 Series - Page 329

363-205-401 RT Turn Up: DLP-512
Issue 7, March 1997 Page 11 of 12
29. Replace
LIU
with correctly optioned
LIU
while observing
FAIL
indicator on
LIU
faceplate.
30. Did
FAIL
indicator on
LIU
go off and remain off?
If
YES,
then
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
If
NO,
then continue with Step
31.
31. Replace
LIU
with
LIU
removed previously.
32. Check wiring using SD-7C117-01 or SD-7C117-02. Repeat procedure from
Step
14
after locating and correcting trouble.