Lucent Technologies SLC 5 Series - Install ASH1 Power Converter Unit (PCU) in 900 A1, 900 A2, or 900 A3 DT Closure

363-205-401 DT Turn Up:
Issue 7, March 1997 Page 1 of 2
DLP-501
Install ASH1 Power Converter Unit (PCU) in 900A1,
900A2, or 900A3 DT Closure
1. Get one
ASH1 PCU
and inspect for physical damage.
2. Align holes on side of PCU board with stand off pins located on inside of
900A1, 900A2, or 900A3 DT closure door (Figure 1) and slide PCU board onto
pins.
Figure 1 – Installation of PCU in 900A1, 900A2, or 900A3 DT Closure