To Next PageTo Next Page
Need help?Do you have a question about the LUCHT LHZ TechnoTherm CHM Series and is the answer not in the manual?
General| Category | Heater |
|---|---|
| Manufacturer | LUCHT LHZ |
| Mounting | Wall-mounted |
| Control Type | Electronic |
| Timer | Yes |
| Model | CHM Series |
| Type | Electric Radiator |
Provides general information about TECHNOTHERM surface storage heaters and their compliance with safety standards.
Details safety precautions for using heaters in dry rooms, including installation and electrical connection requirements.
Specifies minimum distances from walls, floor, and ceiling for safe heater mounting to prevent fire hazards.
General guidance for installing TECHNOTHERM heaters, including preferred locations and thermostat placement.
Provides a diagram and table showing dimensions and drill hole distances for wall mounting various CHM models.
Guidance on contacting after-sales service and requirements for ErP Directive compliance, including specific controller functions.
Details information requirements for electrical room heaters, including capacity, power, and control options for DSM and RF types.
Instructions for mounting the TDI 'plus' Thermostat on the radiator and connecting it to the power card.
Details on accessing and using configuration menus for set-point adjustment, temperature correction, and backlight settings.
Explains how to set the time, program heating schedules, and use quick programming for the thermostat.
Describes how to select and use operating modes like Comfort, Economy, Automatic, Timer, Absence, and keypad locking.
Details the function of open window detection, its activation, and how it interrupts heating.
Explains the adaptive start control feature for reaching set-point temperatures at specific times and adjusting its slope.
Lists technical specifications such as dimensions, operating temperatures, and provides after-sales service contact information.
