Lucky Star 6VA693AM User Manual

6VA693AM
(S-370、FC-PGA)
ATX Form Factor
Main Board
User's Manual

Lucky Star 6VA693AM Specifications

General

Brand	Lucky Star
Model	6VA693AM
Category	Motherboard
Language	English

Summary

1-2 Reference For Pentium® II/III CPUs

1-3 Specifications

1-4 Notice of Hardware Installation

1-5 Notice of CD Driver Installation

2-2 Jumper Setting

2-2-1 RTC1 - CMOS Status

Procedure for clearing CMOS settings using the RTC1 jumper.

2-2-2 SW1 : Cyrix Joshua CPU Frequency Selector

Configure SW1 DIP switch for Cyrix CPU frequency selection.

2-2-3 JP1-JP4 : Audio/AMR Function Selector (Optional)

2-2-4 JP8/JP9/JP10 : CPU Type Selector

Use jumpers JP8, JP9, and JP10 to select the CPU type.

2-2-5 VID0 – VID4 : CPU Vcore Selector

Configure CPU Vcore voltage using VID0-VID4 jumpers.

2-3 Connectors

2-3-1 Front Panel

2-3-2 Back Panel

2-3-3 ATX Power Supply Connector

Details on the 20-pin ATX power supply connector and its function.

2-3-4 CPU Fan Connectors

2-3-5 IR1 : IrDA Connector

2-3-7 IDE1 & IDE2

2-3-8 WOL1 : Wake up on LAN

2-4 DIMM Memory Installation

Chapter 4 BIOS Setup

4-1 Award BIOS CMOS Setup

Guide to navigating and using the Award BIOS CMOS Setup utility.

4-1-1 Standard CMOS Setup

Configure system settings like date, time, and hard disk types in BIOS.

4-1-2 BIOS Feature Setup

Default values and settings for BIOS features, including cache and boot options.

4-1-3 Chipset Feature Setup

Configure VIA chipsets, including DRAM timing and AGP settings.

4-1-4 Power Management Setup

Settings for ACPI and APM power management features, including sleep modes.

4-1-5 PNP/PCI Configuration Setup

Configure Plug and Play (PNP) and PCI device settings.

4-1-6 Integrated Peripherals

Configure onboard peripherals like IDE, FDD, Serial, Parallel, and UART ports.

4-1-7 Password Setting

Procedure for setting or disabling BIOS passwords for system security.

4-1-8 IDE HDD Auto Detection

4-1-9 Load Setup Defaults

4-1-10 Save & Exit Setup

4-1-11 Quit Without Saving