Ludlum Measurements 44-2 - Statement of Warranty; Return of Goods to Manufacturer

Model 44-2 Gamma Scintillator
Ludlum Measurements, Inc. Page 2 March 2010
Note:
If the detector is used in a manner not intended by the
manufacturer, the detector may not function properly.
Unpacking and Repacking
Remove the calibration certificate or detector functional check
certificate and place it in a secure location. Remove the
detector(s) and accessories (if applicable) and ensure that all
items listed on the packing list are in the carton. If multiple
detectors are included, refer to the calibration certificates for
serial number (SN) matches.
To return an instrument or detector for repair or calibration,
provide sufficient packing material to prevent damage during
shipment, and affix appropriate warning labels to promote
careful handling. The following items and information should
also be included to ensure quick turnaround time of your
equipment.
• instrument(s) and related cable(s)
• brief description as to the reason for return
• description of service requested
• return shipping address
• customer name and telephone number