Need help?Do you have a question about the Ludwig LJR106 and is the answer not in the manual?
Attaching bass drum heads and hoops to the shell, ensuring the logo head faces front.
Fitting tension rods with washers and claw hooks onto the bass drum lugs.
Using a drum key to tension the bass drum heads evenly on both sides.
Mounting the bass drum spurs to the drum shell using the T-handle.
Securing the bass drum beater to the pedal assembly using a wing screw.
Attaching the pedal to the bass drum rim and securing with the T-handle.
Installing heads, hoops, and tension rods on the floor tom drum.
Securing the three floor tom legs into the drum's brackets.
Mounting the tom arm holders into the bass drum casting.
Attaching the rack toms to the arms and adjusting height.
Connecting snare stand sections and securing height adjustment.
Positioning the snare drum evenly on the snare stand basket.
Folding out and securing the Hi-Hat stand legs for stability.
Installing the upper pull rod and upper tube into the Hi-Hat stand base.
Attaching the Hi-Hat clutch assembly to the top Hi-Hat cymbal.
Mounting cymbals with felt washers, metal washer, and stop nut.
Mounting the bottom and top Hi-Hat cymbals onto the stand.
Inserting the upper tube into the cymbal stand base and securing it.
Placing the cymbal onto the stand using felt washers.
Tightening the wing screw at the top of the cymbal stand.
To Next Page
General