What to do if my LUKO Air Conditioner is not turning on?
If your LUKO Air Conditioner isn't turning on, make sure the power cord is securely inserted into the wall outlet. Also, empty the drain pan by removing the rubber plug. Ensure that the operating temperature is within the range of 41°F–95°F.
Why is my LUKO Air Conditioner not cooling properly?
If your LUKO Air Conditioner's cooling capacity is reduced, try the following: Clean the air filter, ensure there are no obstructions blocking airflow, keep doors and windows closed, set the mode and temperature according to the manual, and verify the exhaust hose is securely attached.
What to do if my LUKO Air Conditioner displays an error code?
If your LUKO Air Conditioner is showing an error code, here are a few things you can check: * For communication faults, inspect the wire harness of the display PCB for any damage. * If it's related to a temperature sensor, check the connection or consider replacing the sensor. Clean or replace the temperature sensor. * For a high-level alarm of condensed water, empty the drain pan by removing the rubber plug.
Why is my LUKO Air Conditioner making so much noise?
If your LUKO Air Conditioner is excessively noisy, ensure the unit is placed on a horizontal and firm surface. Check that all parts are secure and tightened. Note that some noise from flowing refrigerant is normal.
Overview of the portable air conditioner's cooling, ventilation, and dehumidifying functions for single rooms.
Essential safety guidelines to prevent fire, electric shock, or injury, covering setup and usage.
Visual identification of key parts like control panel, air outlets, and casters.
Highlights capabilities: cooling, dehumidifying, timer, remote control, and mobility.
Steps for unpacking the unit and identifying included accessories, checking for damage.
Guidance on selecting an optimal location, ensuring proper airflow and avoiding heat sources.
Instructions for connecting the exhaust hose assembly to vent hot air outside through a window.
Explanation of control panel buttons and indicators for managing modes, fan speed, and settings.
Overview of remote control layout and functions for operating the unit remotely.
Instructions for start-up, shut-down, operating modes, timer, and auto-defrost functions.
Details on manual and continuous drainage, including water removal and spill prevention.
Procedure for regular cleaning of the air filter to maintain system efficiency and prevent damage.
Safety measures and procedures for handling refrigerant leaks or spills.
Common issues, inspections, solutions, and error codes for diagnosing unit problems.
Guidelines for preparing the unit for long-term storage to prevent damage.
Advice on environmentally responsible disposal of the appliance and its components.
General| Category | Air Conditioner |
|---|---|
| Model | OL-A010L-05CD |
| Brand | LUKO |
| Type | Split System |
| Refrigerant | R410A |
| Power Supply | 220V, 50Hz |
| Operating Temperature (Cooling) | 43 °C |
| Dimensions (Outdoor Unit) | 700 mm |
To Next Page
