To Next PageTo Next PageWhat to do if my LumaRx Full-Body Hair Removal System does not start?
If your LumaRx Full-Body Hair Removal System isn’t starting, ensure the power cord is properly connected to both the device and a working electrical outlet. If the outlet isn't working, check if a wall switch controls the power or try plugging another device into the outlet.
Why is a light flash not emitted when I press the FLASH BUTTON on my LumaRx Full-Body Hair Removal System?
A light flash may not be emitted for several reasons: * Ensure both CONTACT SENSORS are fully touching your skin. * Allow 3-4 seconds between flashes for the bulb to recover. * Check the BULB LIFE LIGHT; if it's flashing yellow, replace the LAMP CARTRIDGE after disconnecting the device.
What to do if the hourglass icon is flashing yellow and the LumaRx Full-Body Hair Removal System is beeping?
If the hourglass icon is flashing yellow and your LumaRx Full-Body Hair Removal System is beeping, it means the hand piece needs to cool down. Wait a few minutes for the device to cool down.
What to do if all the lights on my LumaRx Full-Body Hair Removal System are flashing and the unit is beeping constantly?
If all the lights are flashing and the unit is constantly beeping, check that the treatment cap is properly attached to the HAND PIECE.
General| Device Type | IPL Hair Removal System |
|---|---|
| Model Number | IPL6800USA |
| Technology | Intense Pulsed Light (IPL) |
| Treatment Modes | Manual and Automatic |
| Corded or Cordless | Corded |
| Treatment Areas | Legs, arms, underarms, bikini line, face |
| Power Supply | 100-240V AC, 50/60Hz |
| Energy Levels | 5 levels |
| Hair Color Compatibility | Dark hair |
Overview of device components, control panel, and accessories included with the system.
Guidelines for servicing double-insulated appliances, emphasizing qualified personnel.
Instructions on how to safely exchange the facial and body treatment caps.
Summary of key steps: Prepare skin, unlock, select level, test patch, and treat skin.
Guidance on skin tone and hair color compatibility for effective and safe use of the system.
Specific flash counts for treating various facial areas with the LumaRx system.
Lists individuals and conditions for whom the LumaRx system is not recommended.
Critical safety advisories for device operation, potential hazards, and user restrictions.
Important precautions to follow during and after treatment to prevent skin irritation and other adverse effects.
Information on possible skin reactions like redness, blisters, and discoloration after treatment.
Risk of permanent eye injury if the device is used improperly around the eyes.
Steps for preparing the skin and unlocking the device using the skin tone sensor.
Guidance on selecting energy levels and performing patch tests for safe operation.
Detailed procedure for applying the LumaRx system to treat unwanted hair.
Tips for optimizing treatment timing, shaving, and managing device heat.
How to clean the device components after each use to maintain performance.
Instructions and indicators for when and how to replace the lamp cartridge.
Guidelines for proper disposal or recycling of the device and its accessories.
Solutions for when the LumaRx system fails to power on or unlock.
Troubleshooting steps for problems with flash emission, system beeps, and indicator lights.
How to address issues related to dirt or debris on the device window.
Contact information for customer support, online resources, and physical address.
Technical details including spot size, speed, technology, and electrical requirements.
Details of the product warranty, coverage, and return procedures for defects.
Information on the 90-day money-back offer and how to obtain a refund.
Guidance on the recommended treatment frequency and managing skin irritation.
Templates for recording treatment dates, areas, energy levels, and flashes.
