Need help?Do you have a question about the Lumag BSW66GL and is the answer not in the manual?
Essential safety guidelines for operating the bandsaw mill, including PPE, environmental conditions, and workplace safety.
Defines safe distances around the sawmill and outlines precautions for handling equipment and avoiding hazards.
Instructions for assembling the track system, including attaching cross supports and carriage stops, with initial loose tightening.
Steps for assembling and attaching log dogs and log supports to the track, including greasing and selecting positions.
Removing the head assembly from the crate and inserting vertical post assemblies into the head.
Securing the rear frame, locking cam handles, and positioning the head assembly on the tracks.
Installing pulley, cross support, scale bracket, and indicator rod for the carriage.
Sliding scale indicator, installing cables to pulleys, and adjusting cable bolts for leveling.
Initial carriage assembly: laying out pieces and attaching vertical posts to wheel assemblies.
Instructions on loading logs onto the sawmill bed using a cant hook, pushing them to supports, and locking them with log dogs.
Instructions for starting the engine, operating throttle and handles, and pushing the cutting head for the PBS26G model.
Steps for connecting power, turning on the switch, using micro-switches, and starting the motor for the PBS26E model.
To Next Page
General